The Management Console component is an optional part of a RoboServer. You start the Management Console by starting a RoboServer and instructing it to function as a Management Console, it may still also run the RoboServer functionality.
A RoboServer with Management Console functionality may be started with the "Start Management Console" item in the Start menu (on Windows). On Linux and Unix variants, you can use the command line:
This will start a RoboServer as Management Console only, and thus not capable of running any robots. The Management Console's web interface is accessible by connecting to the port configured in Settings, see Configuring the Embedded Management Console). If you start the Management Console this way, it cannot be restarted or shut down via Control Center or the ShutDownRoboServer program.
The Management Console can also be started using the following command:
RoboServer -p 50000 -MC
This will a start RoboServer listening on a socket at port 50000, and providing Management Console functionality via a web interface on a configured port (the port is configured in Settings, see Configuring the Embedded Management Console).
Regardless of how the Management Console is started, a license key must be entered into the web interface before it can function as a license server for RoboServer and Design Studio instances.
For production scenarios, we recommend that you start one RoboServer
with the Management Console but not add that RoboServer to a cluster. That
way you prevent that Management Console is starved because the RoboServer is
using all the resources. After setting up the RoboServer running the
Management Console, you can start as many RoboServers as you like using
simply the parameter
-p 50000. These are the only RoboServers
that should be added to the RoboServer Clusters on the Clusters tab.
Starting RoboServer gives more information on how to start RoboServer.